1. Research
  2. Publications
  3. Spatially controlled epitaxial ...

Publications

Spatially controlled epitaxial growth of 2D heterostructures via defect engineering using a focused He ion beam

M. Heilmann1,4, V. Deinhart2,3, A. Tahraoui1, K. Höflich3,5 and J.M.J. Lopes1

Published in:

npj 2D Mater. Appl., vol. 5, art. 70, doi:10.1038/s41699-021-00250-z (2021).

Abstract:

The combination of two-dimensional (2D) materials into heterostructures enables the formation of atomically thin devices with designed properties. To achieve a high-density, bottom-up integration, the growth of these 2D heterostructures via van der Waals epitaxy (vdWE) is an attractive alternative to the currently mostly employed mechanical transfer, which is problematic in terms of scaling and reproducibility. Controlling the location of the nuclei formation remains a key challenge in vdWE. Here, a focused He ion beam is used to deterministically place defects in graphene substrates, which serve as preferential nucleation sites for the growth of insulating, 2D hexagonal boron nitride (h-BN). Therewith a mask-free, selective-area vdWE (SAvdWE) is demonstrated, in which nucleation yield and crystal quality of h-BN are controlled by the ion beam parameters used for defect formation. Moreover, h-BN grown via SAvdWE is shown to exhibit electron tunneling characteristics comparable to those of mechanically transferred layers, thereby lying the foundation for a reliable, high-density array fabrication of 2D heterostructures for device integration via defect engineering in 2D substrates.

1 Paul-Drude-Institut für Festkörperelektronik, Leibniz-Institut im Forschungsverbund Berlin e.V., Berlin, Germany
2 Ferdinand-Braun-Institut gGmbH, Leibniz-Institut für Höchstfrequenztechnik, Berlin, Germany
3 Helmholtz-Zentrum Berlin für Materialien und Energie GmbH, Berlin, Germany
4 Present address: IMEC, Leuven, Belgium
5 Present address: Ferdinand-Braun Institut gGmbH, Leibniz-Institut für Höchstfrequenztechnik, Berlin, Germany

© The Author(s) 2021
Reprints and permission information is available at http://www.nature.com/reprints
Open Access
This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommonsorg/licenses/by/4.0/.

Full version in pdf-format.