Optical whispering-gallery-mode (WGM) micro-resonators based on SiO2
The FBH develops disk-type micro-resonators based on SiO2-on-silicon to replace macroscopic optical resonators of modest linewidth and to provide high-Q optical cavities for micro-integration into electro-optical modules.
The Joint Lab Quantum Photonic Components is in charge of component simulation and design as well as optical characterization and hybrid integration into modules. The development of the corresponding process technology is carried by the Process Technology Department .
In thin disk and ring shaped resonators with diameters ranging from a few tens to several hundreds of micrometers, are fabricated in-house from SiO2 on Si wafers. The modes of the optical field are guided close to the circumference by total internal reflection. These modes are known as whispering-gallery modes. Due to the optical quality of thermally grown SiO2 and the excellent quality of the lithographic manufacturing process, material and guiding losses are so small that the light can propagate along the circumference for tens of nanoseconds before being absorbed or scattered. These resonators hence constitute high-Q optical resonators with quality factors of more than 106 and corresponding resonance linewidths of less than 100 MHz. FBH focuses on technology approaches that are compatible with its III-V semiconductor process capabilities. The main challenge here is to integrate the light coupling optics and the resonator monolithically, i.e., “on chip” in order to allow for hybrid integration of chip-scale micro-resonators into electro-optical modules.
Application: Ultra-narrow linewidth laser module
Within the context of the EFRE-funded project iMiLQ a demonstrator for the SiO2 technology platform is being developed together with partners from the Humboldt Universität zu Berlin and two local SMEs, Brilliance Fab Berlin and PicoQuant.
A high-Q optical microresonator is used to provide resonant optical feedback to a laser diode to lock the laser frequency to that of the microresonator. As a result the frequency noise and corresponding laser linewidth is reduced and the laser frequency stability is improved by several orders of magnitude. The laser module will be fully micro-integrated into a custom made, CTE-matched butterfly housing without any moving parts.
- 780 - 1100 nm
Technology and packaging
- semiconductor layers with metalorganic vapor phase epitaxy (MOVPE)
- beam projection lithography
- wet and dry etching
This work was supported by the European Fund for Regional Development (ERDF).