P. Crump, C.M. Schultz, A. Pietrzak, S. Knigge, O. Brox, A. Maaßdorf, F. Bugge, H. Wenzel and G. Erbert

Published in:

Proc. SPIE, vol. 7583, no. 75830N (2010).

Abstract:

Many pumping and direct diode applications of high power diode lasers require sources that operate within a narrow (<1nm) temperature stable spectral line. The natural linewidth of high power broad area lasers is too wide (4-5nm) and varies too quickly with temperature (0.3-0.4nm/K) for such applications. The spectrum can be narrowed by introducing gratings within the diode laser itself or by the use of an external stabilization via a Volume Bragg Grating, VBG. For optimal loss-free, low cost wavelength stabilization with a VBG, the narrowest possible far field angles are preferred, provided power and efficiency are not compromised. Devices that contain internal gratings are potentially the lowest manufacturing cost option, provided performance remains acceptable, as no external optics are required. Therefore, in order to address the need for high power with narrow linewidth, three different diode laser device designs have been developed and are discussed here. For VBG use, two options are compared: (1) devices with high conversion efficiency (68% peak) and reasonable far field (45° with 95% power content) and (2) devices with extremely small vertical far field angle (30° with 95% power content) and reasonable conversion efficiency (59% peak). Thirdly, the latest performance results from broad area devices with internal distributed feedback gratings (DFB-BA Lasers) are also presented, constructed here using buried overgrowth technology. DFB-BA lasers achieve peak conversion efficiency of 58% and operate with <1nm linewidth operation to over 10W continuous wave at 25°C. As a result, the system developer can now select from a range of high performance diode laser designs depending on the requirements.

Index Terms:

diode lasers, high optical power, broad area, high efficiency, small far field, narrow linewidth.

© 2010 COPYRIGHT SPIE--The International Society for Optical Engineering. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the SPIE.

Full version in pdf-format.