Wavelength-Stabilized High-Pulse-Power Laser Diodes for Automotive LiDAR

A. Knigge, A. Klehr, H. Wenzel, A. Zeghuzi, J. Fricke, A. Maaßdorf, A. Liero, and G. Tränkle

Published in:

phys. stat. sol. (a), vol. 215, no. 8, pp. 1700439 (2018).

Copyright © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.


For automotive light detection and ranging (LiDAR) systems diode lasers emitting short optical pulses with a good beam quality and a low wavelength shift over a wide operating temperature range is needed. In this paper, theoretical and experimental results of broad area laser diodes specially designed for this application are presented. Optical pulse powers of tens of watts and pulse lengths in the 10 ns-range for wavelengths near 905nm and environmental temperatures between 15 and 85 °C are achieved. Due to the integrated Bragg grating the wavelength shift with temperature is as low as 65 pm K-1. The contact mesa with a width of 50 µm leads to a lateral M2 value of about 9. Streak camera measurements of the temporal evolution of the lateral near field intensity reveal that the highest intensity is emitted near the mesa edges. Simulation results of power current characteristics indicate that the power saturation experimentally observed can be attributed to nonlinear effects such as two-photonabsorption and gain compression.

Ferdinand-Braun-Institut, Leibniz-Institut für Höchstfrequenztechnik (FBH), Gustav-Kirchhoff-Str. 4, 12489 Berlin, Germany


distributed Bragg reflector; laser diodes; LiDAR; simulations.