Tapered Diode Lasers and Laser Modules near 635nm with Efficient Fiber Coupling for Flying-Spot Display Applications

G. Blume, C. Kaspari*, D. Feise, A. Sahm, B. Sumpf, B. Eppich, and K. Paschke

Published in:

Opt. Rev., vol. 19, no. 6, pp. 395-399 (2012).

Copyright © 2012 The Japan Society of Applied Physics. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the Japan Society of Applied Physics.


Flying-spot displays require light sources in the red, green and blue with a high optical output power and nearly diffraction limited beams. In this paper we present experimental results of red-emitting, AlGaInP based, tapered diode lasers and their integration into diode laser modules. The laser modules emit a collimated, almost diffraction limited beam with an optical output power as high as 1W at a wavelength close to 635 nm. The tapered laser chips were designed with emphasis on achieving a good beam quality in vertical and lateral directions of a collimated beam. To test the suitability for flying-spot display applications, we performed fiber coupling experiments with a low mode number optical fiber with an etendue as low as 6 x 10-6 mm2 sr. A maximum transmission of 70% of the launched power behind the uncoated fiber as well as a usable power in excess of 580mW were measured.

Ferdinand-Braun-Institut, Leibniz-Institut für Höchstfrequenztechnik, Gustav-Kirchhoff-Straße 4, D-12489 Berlin, Germany
* Present address: LayTec AG, Seesener Str. 10-13, 10709 Berlin, Germany


tapered diode laser, fiber coupling, brightness, red-emitting.