Digital Sequential PA for Flexible Efficiency Tuning Over Wide Power Back-Off Range

A. Wentzel, and W. Heinrich

Published in:

IEEE MTT-S Int. Microw. Symp. Dig., Philadelphia, USA, Jun. 10-15, pp. 1226-1229 (2018).

© Copyright 2018 IEEE - All rights reserved. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.

Abstract:

This paper presents the first digitally designed sequential power amplifier (DSPA) module setup for the 900 MHz range. The demonstrator applies an H-bridge (peak PA) as well as a single-ended digital power amplifier (main PA) both utilizing a 4-stage GaN-based voltage-mode class-D/S PA MMIC. Maximum output power of H-bridge is 6.7 W while the main PA delivers 4.9 W for 40 V final-stage drain supply voltage (VDD). The amplifiers are combined with a simple 3 dB power combiner to achieve sequential PA operation for high efficiency over a wide power back-off (PBO) range. While varying VDD_peak and applying digital Doherty operation to the peak PA the DSPA reaches several maxima in drain efficiency over a 12 dB PBO range. The same is true for VDD-tuning of the main PA. The flexible efficiency peak tuning makes the DSPA suitable for operation with different modulated signals varying in encoded PBO and signal bandwidth. At 5 dB, 8 dB and 10.5 dB PBO the DSPA achieves a final-stage drain efficiency of 67%, 74% and 71%, respectively. Due to the digital design of both PAs the very compact DSPA can be easily reconfigured for other frequency bands by only changing output filters and coupler.

Ferdinand-Braun-Institut (FBH), Leibniz-Institut für Höchstfrequenztechnik (FBH), 12489 Berlin, Germany

Index Terms:

mobile communication, digital, sequential power amplifier (PA), efficiency enhancement, voltage-mode, GaN.