D. Jedrzejczyk, R. Güther, K. Paschke, G. Erbert, G. Tränkle

Published in:

Appl. Phys. B, vol. 109, no. 1, pp. 33-42 (2012).

Abstract:

In this work, we investigate experimentally and theoretically limitations of highly efficient high-power single-pass second-harmonic generation process in a quasiphase matched magnesium oxide-doped lithium niobate ridge waveguide due to structural imperfections, optical absorption and resulting heat generation. With the distributed Bragg reflector diode laser emitting at 1,061 nm, applied in the presented bench-top experiment, a coupling efficiency into the ridge waveguide nonlinear device of 86 % is realized. An internal normalized conversion efficiency of 375 % (Wcm²)^-1 is determined. A maximum second-harmonic power of 386 mW is reached at a corresponding opto-optical and electro-optical conversion efficiency of 38 and 9.5 %, respectively. A saturation of the conversion efficiency at a high power level as well as its dependency on the nonlinear device structure inhomogeneity are confirmed experimentally. With a theoretical model incorporating geometrical inhomogeneity, linear and nonlinear absorption and resulting heat load the secondharmonic generation in a ridge waveguide can be simulated realistically. Increased values of nonlinear absorption coefficients, higher than until now reported, lead to a very good agreement between theoretical and experimental results. Moreover, according to the simulation, structural inhomogeneities can enhance the SHG conversion efficiency at high output powers.

© Springer-Verlag 2012. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the Springer-Verlag.

Full version in pdf-format.