Highly Compact GaN-based All-Digital Transmitter Chain Including SPDT Switch for Massive MIMO

F. Hühn, A. Wentzel, W. Heinrich

Published in:

48th European Microwave Conference (EuMC 2018), Madrid, Spain, Sep. 25-27, pp. 918-921 (2018).

Copyright © 2018 EuMA. All rights reserved. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the EuMA.

Abstract:

This paper presents a fully digital transmitter chain from baseband to antenna, including a modulator, a truly digital (i.e. switch mode) microwave power amplifier and a transmit / receive switch. Both, amplifier and switch MMIC were implemented in a GaN HEMT process. The novel amplifier design provides greatly reduced complexity, needing only three voltage sources. Measurements were conducted using 5MHz and 20MHz wide baseband (BB) signals on a carrier of 900 MHz. For the 5MHz BB signal an ACLR of over 52 dB has been reached, fulfilling the 3GPP specs for base station use while still maintaining a final-stage drain efficiency of 46% at 6.5 dB peak to average power ratio. Full-scale output power at 30V supply voltage was measured to exceed 3W at 80% drain efficiency. Further features of this digital amplifier approach include small form factor and extreme frequency agility, making it an ideal candidate for software defined radio.

Ferdinand-Braun-Institut, Leibniz-Institut für Höchstfrequenztechnik (FBH), Berlin, Germany

Keywords:

5G mobile communication, power amplifiers, massive MIMO, digital transmitter, Millimeter wave integrated circuits, Switching circuits.