Thermal optimization of second harmonic generation at high pump powers
A. Sahm, M. Uebernickel, K. Paschke, G. Erbert, and G. Tränkle
Published in:
Opt. Express, vol. 19, no. 23, pp. 23029-23035 (2011).
Abstract:
We measure the temperature distribution of a 3 cm long periodically poled LiNbO3 crystal in a single-pass second harmonic generation (SHG) setup at 488 nm. By means of three resistance heaters and directly mounted Pt100 sensors the crystal is subdivided in three sections. 9.4 W infrared pump light and 1.3 W of SHG light cause a de-homogenized temperature distribution of 0.2 K between the middle and back section. A sectional offset heating is used to homogenize the temperature in those two sections and thus increasing the conversion efficiency. A 15% higher SHG output power matching the prediction of our theoretical model is achieved.
Ferdinand-Braun-Institut, Leibniz-Institut für Höchstfrequenztechnik, Gustav-Kirchhoff-Straße 4, D-12489 Berlin, Germany
OCIS codes:
(140.2020) Diode lasers; (140.3515) Lasers, frequency doubled; (190.2620) Harmonic generation and mixing; (140.6810) Thermal effects.
© 2011 Optical Society of America. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the Optical Society of America.
Full version in pdf-format.