M. Tawfieq1,2, J. Fricke1, C. Stölmacker1, P. Della Casa1, P.E. Andersen2, B. Sumpf1, and G. Tränkle1
Appl. Opt., vol. 60, no. 7, pp. 1864-1870 (2021).
Lasing emission at multiple wavelengths can be used in different sensing applications and in optical telecommunication. In this work, we report a six-wavelength distributed Bragg reflector (DBR) laser, emitting around 976 nm with six ridge waveguide (RW) structures, where individual DBR gratings are combined into a common front section. These six elements are individually addressable and biased one at a time for individual wavelength selection. The drawback of this RW combination is observable in spatial characteristics where higher-order modes are supported. We addressed this issue by using a master oscillator power amplifier (MOPA) system that combines the six-wavelength MO laser with a tapered PA. Through this configuration, the PA acts as a spatial filter of the MO beam, providing a nearly diffraction-limited beam with M21/e2<1.5. In addition, the described MOPA system provides output powers around 4 W with spectral single-mode operation, with up to 9.36 nm of thermal wavelength tuning. We believe that the described MOPA configuration can be used in different applications, such as absorption spectroscopy.
1 Ferdinand-Braun-Institut, Leibniz-Institut für Höchstfrequenztechnik, Gustav-Kirchhoff-Str. 4, 12489 Berlin, Germany
2 Technical University of Denmark, Department of Health Technology, Ørsteds Plads, Building 345C, 2800 Kgs. Lyngby, Denmark
Bragg reflectors, Laser arrays, Laser sources, Light sources, Master oscillator power amplifiers, Optical amplification
Copyright © 2021 Optical Society of America. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the OSA.
Full version in pdf-format.