Reducing Thermal Resistance of AlGaN/GaN Electronic Devices Using Novel Nucleation Layers
G.J. Riedel1, J.W. Pomeroy1, K.P. Hilton2, J.O. Maclean2, D.J. Wallis2, M.J. Uren2, T. Martin2, U. Forsberg3, A. Lundskog3, A. Kakanakova-Georgieva3, G. Pozina3, E. Janzen3, R. Lossy4, R. Pazirandeh4, F. Brunner4, J. Würfl4, M. Kuball1
Published in:
IEEE Electron Device Lett., vol. 30, no. 2, pp. 103-106 (2009).
Abstract:
Currently, up to 50% of the channel temperature in AlGaN/GaN electronic devices is due to the thermal-boundary resistance (TBR) associated with the nucleation layer (NL) needed between GaN and SiC substrates for high-quality heteroepitaxy. Using 3-D time-resolved Raman thermography, it is shown that modifying the NL used for GaN on SiC epitaxy from the metal-organic chemical vapor deposition (MOCVD)-grown standard AlN-NL to a hot-wall MOCVD-grown AlN-NL reduces NL TBR by 25%, resulting in ~10% reduction of the operating temperature of AlGaN/GaN HEMTs. Considering the exponential relationship between device lifetime and temperature, lower TBR NLs open new opportunities for improving the reliability of AlGaN/GaN devices.
1 H. H. Wills Physics Laboratory, University of Bristol, BS8 1TL Bristol, U.K.
2 QinetiQ Ltd., WR14 3PS Malvern, U.K.
3 Department of Physics, Chemistry and Biology, Linköping University, 582 46 Linköping, Sweden
4 Ferdinand-Braun-Institut für Höchstfrequenztechnik, Gustav-Kirchhoff-Strasse 4, 12489 Berlin, Germany
Index Terms:
CVD, epitaxial layers, FETs, gallium compounds, MODFETs, resistance heating.
© Copyright 2009 IEEE - All Rights Reserved. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
Full version in pdf-format.