1. Forschung
  2. Publikationen
  3. Optimization of 808 nm DBR RW ...


Wissenschaftliche Beiträge

 zu Konferenzen finden Sie übrigens auch bei den Terminen.

Optimization of 808 nm DBR RW Laser Bars for Operation at Low Noise and High Reliability

K. Häusler, H. Wenzel, J. Fricke, S. Kreutzmann, and A. Knigge

Published in:

Conf. on Lasers and Electro-Optics/Europe and European Quantum Electronics Conf. (CLEO/Europe-EQEC 2019), Munich, Germany, Jun. 23-27, ISBN: 978-1-7281-0469-0, cb-5.6 (2019).


In view of recent advances of coherent optical communications in space there is an increasing demand for reliable lasers for low noise pumping of solid state lasers. In laser communication terminals Nd doped ring resonators are pumped by externally wavelength stabilized 808 nm lasers with an optical power of a few hundred milliwatts. Those laser devices suffer from intensity noise originating from competition and switching of longitudinal and lateral optical modes in the low frequency range up to about 1 MHz [1]. In this contribution we present the design as well as electro-optical and life test data of different types of distributed Bragg reflector (DBR) ridge waveguide (RW) laser bars providing single mode emission with low intensity noise. For the first time acceleration parameters of degradation by thermal activation and operational stress were derived for DBR RW laser bars from life tests with test durations of nearly one year.

Ferdinand-Braun-Institut, Leibniz Institut für Höchstfrequenztechnik, Gustav-Kirchhoff-Str. 4, 12489 Berlin, Germany

Copyright © 2019 IEEE - All rights reserved. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.

Full version in pdf-format.