Nonlinear Properties of Tapered Laser Cavities
S. Sujecki1, L. Borruel2, J. Wykes1, P. Moreno2, B. Sumpf3 , P. Sewell1, H. Wenzel3, T.M. Benson1, G. Erbert3, I. Esquivias2, and E.C. Larkins1
Published in:
IEEE Journal of Selected Topics in Quantum Electronics, Vol. 9, No. 3, pp. 823-834, 2003.
Abstract:
The nonlinear phenomena accompanying the process of light generation in high-power tapered semiconductor lasers are studied using a combination of simulation and experiment. Optical pumping, electrical overpumping, filamentation, and spatial hole burning are shown to be the key nonlinear phenomena influencing the operation of tapered lasers at high output powers. In the particular tapered laser studied, the optical pumping effect is found to have the largest impact on the output beam quality. The simulation model used in this study employs the wide-angle finite-difference beam propagation method for the analysis of the optical propagation within the cavity. Quasi-three-dimensional (3-D) thermal and electrical models are used for the calculation of the 3-D distributions of the temperature, electrons, holes, and electrical potential. The simulation results reproduce key features and the experimental trends.
1 School of Electrical and Electronic Engineering, University of Nottingham, Nottingham NG7 2RD, U.K.
2 Departamento de Tecnología Fotónica, Universidad Politécnica de Madrid, Madrid 28040, Spain
3 Ferdinand-Braun-Institut für Höchstfrequenztechnik, D-12489 Berlin, Germany
Index Terms:
Beam propagation modeling, high-brightness lasers, laser resonators, optical beams, semiconductor lasers.
© 2003 IEEE. All rights reserved. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
Full version in pdf-format.