MOVPE growth for UV-LEDs
A. Knauera, F. Brunnera, T. Kolbeb, V. Küllera, H. Rodrigueza, S. Einfeldta, M. Weyersa, M. Kneissla,b
Published in:
Proc. SPIE, vol. 7231, no. 72310G (2009).
Abstract:
Challenges for the MOVPE growth of LED heterostructures for emission in the UV-A and UV-B spectral range are discussed. Special attention is given to the effects of strain in the In(Al)GaN active region as well as in the complete layer stack. Here in-situ monitoring of wafer bowing is shown to be an important tool for optimization of the growth sequence. We will compare different buffer layer technologies, in particular GaN/sapphire for LEDs emitting at 380 nm and AlN/AlGaN buffer for shorter wavelength LEDs. By increasing the aluminum content in the InAlGaN multiplequantum- well active region and by optimizing the composition and doping profile of the electron blocking layers UV LEDs with emission wavelength between 380 nm and 318 nm are demonstrated.
a Ferdinand-Braun-Institut für Höchstfrequenztechnik, Gustav-Kirchhoff-Strasse 4, 12489 Berlin, Germany
b TU Berlin, Inst. for Solid State Physics, Hardenbergstr. 36, 10623 Berlin, Germany
Keywords:
UV, ultraviolet, light emitting diodes, LEDs, AlN, AlGaN, AlGaInN, MOVPE, epitaxy.
© 2009 COPYRIGHT SPIE--The International Society for Optical Engineering. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the SPIE.
Full version in pdf-format.