Influence of GaN cap on robustness of AlGaN/GaN HEMTs
P. Ivo1, A. Glowacki2, R. Pazirandeh1, E. Bahat-Treidel1, R. Lossy1, J. Würfl1, C. Boit2, G. Tränkle1
Published in:
IEEE Int. Reliability Physics Symposium, Montreal, QC, Apr. 26-30, pp. 71-75 (2009).
Abstract:
DC-Step-Stress-Tests of GaN HEMTs have been performed on wafers with and without GaN-cap. The tests consist of a step ramping of drain-source voltage VDS by 5V every two hours at off-state. The irreversible evolution of leakage current starting at a certain drain voltage has been taken as a criterion for the onset of device degradation. It has been stated that there is a stability limit for VDS depending on the epitaxial design. It has been found that wafers with GaN cap show much higher critical voltages as compared to non-capped epitaxial designs. Electroluminescence measurements have been performed to localize defects after DC-Step-Stress-Tests up to 80V for wafer without GaN cap and 120V for wafer with GaN cap.
1 Ferdinand-Braun-Institut für Höchstfrequenztechnik, Gustav-Kirchhoff-Strasse 4, 12489 Berlin, Germany
2 Institut für Hochfrequenz- und Halbleiter-Systemtechnologien, Technische Universität Berlin Berlin, Germany
Keywords:
GaN reliability, electroluminescence, GaN cap, gate leakage current, critical voltage
© Copyright 2009 IEEE - All Rights Reserved. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
Full version in pdf-format.