C. Kaspari, M. Zorn, M. Weyers, G. Erbert

Published in:

J. Cryst. Growth, vol. 310, no. 23, pp. 5175-5177 (2008) .

Abstract:

GaAs-based laser diodes emitting in the red spectral region have challenging material and thermal properties when reducing the emission wavelength towards the physical limit around 630 nm. To improve the properties of such laser diodes, we have optimized the growth parameters of the GaInP quantum wells (QW) embedded in AlGaInP. The growth temperature and the V/III ratio during growth of the QW was varied. By reducing the QW growth temperature from 770 to 700°C, an improvement of the laser performance was achieved at 635 and at 643 nm laser emission wavelength. By increasing the V/III ratio, a higher photoluminescence intensity could be achieved in QW test samples. Combining both approaches important laser parameters like threshold current density, differential efficiency and internal absorption were improved substantially.

Keywords:

A3. Metalorganic vapor phase epitaxy B2. Semiconducting III-V materials B3. Laser diodes

© 2008 Elsevier B.V. All rights reserved. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the Elsevier B.V.

Full version in pdf-format.