Design and Simulation of Next-Generation High-Power, High-Brightness Laser Diodes

J.J. Lim¹, S. Sujecki¹, L. Lang¹, Z. Zhang¹, D. Paboeuf², G. Pauliat², G. Lucas-Leclin², P. Georges², R.C.I. MacKenzie¹, P. Bream¹, S. Bull¹, K.-H. Hasler³, B. Sumpf³, H. Wenzel³, G. Erbert³, B. Thestrup⁴, P.M. Petersen⁴, N. Michel⁵, M. Krakowski⁵, and E.C. Larkins¹

¹ Department of Electrical and Electronic Engineering, University of Nottingham, Nottingham NG7 2RD, U.K.
² Laboratoire Charles Fabry de l’Institut d’Optique, Centre National de la Recherche Scientifique (CNRS), University Paris Sud, 91127 Palaiseau, France
³ Ferdinand-Braun-Institut für Höchstfrequenztechnik, Gustav-Kirchhoff-Straße 4, 12489 Berlin, Germany
⁴ DTU Fotonik, Technical University of Denmark, 4000 Roskilde, Denmark
⁵ Alcatel-Thales III-V Lab, 91767 Palaiseau, France

Published in:
IEEE J. Sel. Top. Quantum Electron., vol. 15, No. 3, pp. 993-1008 (2009).
© Copyright 2009 IEEE - All Rights Reserved. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.

Abstract:
High-brightness laser diode technology is progressing rapidly in response to competitive and evolving markets. The large volume resonators required for high-power, high-brightness operation makes their beam parameters and brightness sensitive to thermal- and carrier-induced lensing and also to multimode operation. Power and beam quality are no longer the only concerns for the design of high-brightness lasers. The increased demand for these technologies is accompanied by new performance requirements, including a wider range of wavelengths, direct electrical modulation, spectral purity and stability, and phase-locking techniques for coherent beam combining. This paper explores some of the next-generation technologies being pursued, while illustrating the growing importance of simulation and design tools. The paper begins by investigating the brightness limitations of broadarea laser diodes, including the use of asymmetric feedback to improve themodal discrimination. Next, tapered lasers are considered, with an emphasis on emerging device technologies for applications requiring electrical modulation and high spectral brightness. These include two-contact lasers, self-organizing cavity lasers, and a phase-locked laser array using an external Talbot cavity.

Index Terms:
External cavity laser diodes, high-brightness lasers, high-power lasers, laser simulation, modal discrimination, phasecoupled laser diode arrays, self-organizing laser.

Full version in pdf-format.