Proton-implanted shallow-ridge quantum-cascade laser

Published in:
IEEE Journal of Quantum Electronics, vol. 42, no. 5, pp. 490- 493, May 2006.
© 2006 The IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.

Abstract:
We demonstrate a shallow-ridge quantum-cascade laser (QCL) with performance comparable or better than that of deep-ridge QCLs fabricated from the same wafer. The shallow-ridge QCL emits at /spl ap/4 /spl mu/m with a 4.6-4.8 kA/cm² threshold current density at room temperature which is similar to the deep-ridge QCL. At the same time the shallow-ridge QCL shows a better temperature stability, T₀=160 K, than the deep-ridge QCL, with T₀=120 K. The increase in the characteristic temperature of the shallow-ridge laser compared to the deep-ridge laser results from the improved heat dissipation out of the laser ridge through the lateral heat flow. Lateral spreading of the injection current-usually a drawback of shallow-ridge lasers-is suppressed by proton implantation into the strain-compensated InGaAs-AlAs active region layers on either side of the ridge. In contrast to the case of In_0.53Ga_0.47As layers and of In_0.53Ga_0.47As-In_0.52Al_0.48As heterostructures lattice matched to InP, the proton implantation of strain-compensated In_0.73Ga_0.27As-AlAs heterostructure on InP creates deep (180 meV) carrier traps, resulting in this material being electrically insulating even at room temperature.

Full version in pdf-format.