Mechanism of ohmic contact formation in AlGaN/GaN high electron mobility transistors

Published in:
Semicond. Sci. Technol., vol. 21, no. 2, pp.175-179 (2006).
© Institute of Physics (the "Institute") and IOP Publishing Limited ("IOPP") 2006. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the Institute of Physics and IOP Publishing Limited.

Abstract:
We tested various ohmic contact metallization schemes on AlGaN/GaN HEMTs to achieve low contact resistance, good surface morphology and proper line edge definition. Mo, Ni and Pt intermediate layers in these schemes replaced the intermediate Ti layer interposed between Al and Au in Ti/Al/Ti/Au contacts. We recorded almost similar values of the contact resistance lying in the range of 0.3-0.5 Ω mm on all the metallization stacks, but a significant difference was observed in their surface morphology and line edge definition. The formation of particular intermetallic compounds due to different intermediate layers was found to be responsible for this difference. Ti/Al/Ti/Au/WSiN contacts possessed excellent surface morphology. Mo based contact not only delivered good surface morphology and low contact resistance but also proper line edge definition. We found that the formation of Al-Mo phase and GaMo₃ compound was the key factor responsible for its remarkable performance.

Full version in pdf-format.