 |
High-efficiency AlGaInP/AlGaAs vertical-cavity surface-emitting lasers with 650 nm wavelength
A. Knigge, M. Zorn, J. Sebastian, K. Vogel, H. Wenzel, M. Weyers, and G. Tränkle
Ferdinand-Braun-Institut für Höchstfrequenztechnik, Albert-Einstein-Straße 11, D-12489 Berlin, Germany
Published in:
IEE Proc.-Optoelectron., Vol. 150, No. 2, April 2003, pp. 110-114.
© 2003 The IEE. All rights reserved. Personal use of this material is permitted. However, permission to reprint/republish this material for
advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists,
or to reuse any copyrighted component of this work in other works must be obtained from the IEE.

Abstract:
The optimisation of red, AlGaInP/AlGaAs-based, selectively oxidised vertical-cavity surface-emitting
lasers (VCSELs) with 650 nm emission wavelength having all-semiconductor p-distributed
Bragg reflectors is reported. The increase of the AlP content in parts of the cavity, tailoring
of the doping profile and removal of the contact layer in the output window lead to VCSELs with
threshold current densities of 1.8 kA/cm2 and continuous wave output powers of
3.1 mW to 4.6 mW at 20 °C for wavelengths between 650 nm and 657 nm. These
devices with current apertures around 13 µm show laser emission above temperatures of 40 °C;
devices with smaller apertures and room temperature output powers of 1 mW show laser emission
up to 60 °C.
|
|