 |
Properties of (In,Ga)(As,P)/GaAs interfaces grown under different metalorganic vapor phase epitaxy conditions
A. Knauera,
P. Krispinb, V.R. Balakrishnanb, M. Weyersa
a Ferdinand-Braun-Institut für Höchstfrequenztechnik, Albert-Einstein-Straße 11, D-12489 Berlin, Germany
b Paul-Drude-Institut für Festkörperelektronik, Hausvogteiplatz 5-7, D-10117 Berlin, Germany
Published in:
Journal of Crystal Growth 248 (2003) 364-368.
© 1999-2003, Elsevier Science B.V.. Personal use of this material is permitted. However, permission to reprint/republish this material for
advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists,
or to reuse any copyrighted component of this work in other works must be obtained from the Elsevier Science B.V.

Abstract:
The mechanisms for formation of interlayers at the interface of GaAs on (In,Ga)P and
In0.15Ga0.85As0.7P0.3 grown by
metalorganic vapor phase epitaxy have been studied by capacitance-voltage profiling of the electron concentration.
Shallow In-rich quantum wells (QWs) are formed in (In,Ga)P during growth interruptions under PH3 stabilization.
These QWs are seen in C-V profiles, but not in photoluminescence and X-ray diffraction. Stabilization of (In,Ga)P
under AsH3 yields thin ( 1-2 nm thick ) (In,Ga)(As,P) interlayers, which
are observed by X-ray diffraction and capacitance-voltage profiles. Under optimized conditions, these interlayers
exhibit negligibly small band offsets. When growing GaAs on quaternary (In,Ga)(As,P), interlayers can be avoided
even at high growth temperatures and long growth interruptions. Independent on the chosen growth conditions,
the (In,Ga)P and (In,Ga)(As,P) layers as well as the investigated interfaces are practically free of defect
levels as determined by deep-level transient Fourier spectroscopy.
Keywords:
A1. Characterization; A1. Interfaces; A3. Low press, metalorganic vapor phase epitaxy;
B2. Semiconducting gallium arsenide; B2. Semiconducting indium gallium phosphide;
B2. Semiconducting quaternary alloys
Full version in pdf-format.
|
|